Electric Engraving Pen Mini Grinding Set Fast Charging Lightweight for DIY Enthusiasts Cordless Engraver for Metal Wood Jewelry (Rose Gold)

1. [FAST CHARGING] 80% charge in 30 minutes, fully charged in 1 hour 2. [PORTABLE DESIGN] Lightweight and easy to carry for on-the-go use 3. [MULTIFUNCTIONAL] Supports engraving, grinding, polishing, drilling, cutting, etc. 4. [INDICATOR LIGHTS] Power, speed, and overload indicators for easy monitoring 5. [TYPE C CHARGABLE] Comes with Type C charging cable for convenience Spec: Item Type: Electric Engraving Pen Material: Metal Plastic Adapt to Grinding Head Shank Diameter: Approx. 2.35mm/0.1in Chuck Depth: Approx. 25mm/1.0in Speed: 5000,10000,18000 Third Levels Power: 10W Use Time: The Third Level Runs for More Than 1 Hour with No Load. if You Need to Use It for a Long Time, You Can Use It While Charging Battery Voltage: 4.2V Battery Type: Lithium Battery (shipped with built in battery) Battery Capacity: 300mah Charging: 80% Full in 30 Minutes, Full in 60 Minutes How to Use: Install the grinding head: 1. Put the grinding head into the chuck 2. Use the Hex wrench to tighten the grinding head fastening screw Start using: 1. Lightly press the power button once to enter the 1st gear working state, the speed is about 5000 rpm 2. Press the power button once again to enter the second gear working state, the speed is about 10000 rpm 3. Press the switch key once again to enter the 3rd gear working state, the speed is about 18000 rpm 4. Tap the power button once again to enter the shutdown state 5. During use, the load display will display the load status in real time according to the situation 6. Overload display, when the load is too large, the overload display light will be on for 2 seconds, and the overload system will shut down for protection 7. According to the current situation of use, the user can grasp the load situation, please use it within the overload range packing list: 1 x Electric Engraving Pen 1 x Hex Wrench 1 x Charging Cable 30 x Grinding Needles 1 x Grinding Needle Storage Box 2 x Drill Bits 6 x Slices 2 x Slice Connecting Rod 2 x Metal Grinding Heads 16 x Templates 1 x User Manual Note: Shipped with Built in Battery 1. Electric grinding power is small, suitable for small engraving and grinding field 2. Do not place the electric grinder in a high temperature place above 40 degrees

• [FAST CHARGING] 80% charge in 30 minutes, fully charged in 1 hour
• [PORTABLE DESIGN] Lightweight and easy to carry for on-the-go use
• [MULTIFUNCTIONAL] Supports engraving, grinding, polishing, drilling, cutting, etc.
• [INDICATOR LIGHTS] Power, speed, and overload indicators for easy monitoring
• [TYPE C CHARGABLE] Comes with Type C charging cable for convenience